Paver Patio Designs for Your Home

Before you get started with brick paver patio designs, it's important you spend a little time researching exactly what is involved in the process.

This is especially important for those people interested in do-it-yourself paver patio design projects.

One of the most important things to research when deciding on brick pavers for patio designs, is the actual design you will use in creating your patio.

Remember that the outcome of the design will help to enhance the overall beauty of the home and the landscape of the yard, so it is essential to spend time considering exactly how you will design the brick pavers.

With stone patio designs, it may be a little easier to get away with organizing them as you work, but bricks are more uniform in appearance, so they will be more noticeable if out of place.

Spend some time looking at patio designs in magazines and books, or even looking them up online before deciding which one works best for your home.

Consider The Following Popular Paver Patio Designs

Running Bond

The simplest of designs for laying paver bricks, is most often seen in laying bricks on a house. Although it is not particularly unique, it is a great design to start with for a first-time bricklayer. When using this method, lay the first row of bricks side by side.

On the second row, lay the edge of a new brick in the center of the brick above it. Continue this for each row until you are at the bottom.

Pinwheel

A beautiful design, but a bit more complex for a new bricklayer, the pinwheel will start with a half brick in the center and four bricks making a square around it, touching each other on half of the brick.

From here, the four bricks are surrounded by an eight-brick square, and so on, until reaching the corners of the excavated area. This works well with equally proportioned areas.

The Basket Weave

This design incorporates pairs of bricks, with 8 bricks assembled to resemble one large square. Two sets of pairs will be laid horizontally and two will be laid vertically, or two as columns and two as rows.

If you start in the upper corner of your excavated area, you will do as follows, going down first and then over. Two bricks standing horizontally, then two vertically, two horizontally, and two vertically throughout the entire design.

The Herringbone

This design works well with patios that will not be exactly straight or perfectly shaped. The herringbone requires setting all of the paver bricks in a diagonal shape all the way across the patio, with the ability to cut or shave off the bricks when reaching the end of the design space.

To create the diagonal design, you will alternate with bricks facing diagonal to the right and then up against it with one facing to the left and continue to alternate.

When reaching the sides of the design, the cutting of the brick will come in to fit with the diagonal pattern.

Patio Pavers - Circular Pattern

Although it may be a bit tricky for those interested in do-it-yourself projects, a gorgeous design for a brick paver patio is a circular design.

This usually only works if the patio design area is circular but can work if only the inside portion of the design is made circular.

It is best to frame off the area if only making a portion circular. Begin by placing bricks in a layer around the outside and gradually work your way into the center, cutting the brick in the middle if necessary.

Need more patio design ideas? Take a look at our flagstone patio designs for more tips.